Custom Fabric Charger Plates
This is an easy craft with big impact. It takes about 10 minutes, and will spice up your holiday table into a gorgeous masterpiece.
Materials
- 4 plastic charger plates I used 1 yard of fabric for 4 charger plates
- 1-2 yards of holiday fabric depending on how many charger plates you would like to cover
- 1 can spray mount adhesive
- 1 white colored pencil
- 1 pair scissors
Instructions
- Clean plastic free of any lint that has accumulated.
- Place plate upside down on top of fabric.
- Using the white colored pencil, trace around the diameter of the plate, leaving a 1-inch allowance. With the scissors, cut along white line.
- Before spraying with the spray mount, make sure you are in a well-ventilated area. If you are spraying inside, I recommend using a larger sized box as a backdrop, and placing the plate(s) in the box to spray.
- Spray the front of the plate in even strokes, fully covering the plate with adhesive.
- Place the material, right side up, on the plate. Carefully rub the fabric, getting out all wrinkles and bubbles, if any, creating a smooth surface.
- Once the fabric is smoothed out, turn plate over. With the scissors, cut along the rim of the plate, to cut off the excess fabric
- Let dry in single layers before stacking.
Notes
